Click image to view full size image
Sintered bearing, also named oil impregnated bearing, is made by powder metallurgy technology, which is pressed by the mould and do sintering, coining, then it will be soaked in the lubricating oil in vacuum, it is porous structure, and oil impregnated.
Advantages:
1.Self-lubricating and maintenance-free
2.Corrosion resistant and wear resistant
3.Good thermal conductivity
4.Suitable for dry and oil-free working condition
5.High production efficiency and cost effective
Sintered iron bearing
Density: 5.6 - 6.5 g/cm³
Oil content: 18 - 25%
Sintered copper bearing
Density: 6.2 – 7.4 g/cm³
Oil content: 12 - 30%
U.S. MPIF 35-2007 Material Standard for PM Self-lubracating Bearing | |
Designation Code |
Designation Code |
CT-1000-K19 |
FC-0303-K10 |
CT-1000-K26 |
FC-0303-K12 |
CT-1000-K37 |
FC-0308-K16 |
CT-1000-K40 |
FC-0308-K22 |
CTG-1001-K17 |
FC-0200-K20 |
CTG-1001-K23 |
FC-0200-K34 |
CTG-1001-K30 |
FC-1000-K20 |
CTG-1001-K34 |
FC-1000-K30 |
CTG-1004-K10 |
FC-1000-K40 |
CTG-1004-K15 |
FC-2000-K25 |
FCTC-3604-K16 |
FC-2000-K30 |
FCTC-3604-K22 |
FC-2000-K40 |
FCTC-3806-K14 |
FC-0205-K20 |
FCTC-3806-K22 |
FC-0205-K35 |
F-0000-K15 |
FC-0208-K25 |
F-0000-K23 |
FC-0208-K40 |
F-0005-K20 |
FC-0508-K35 |
F-0005-K28 |
FC-0508-K46 |
F-0008-K20 |
FC-2008-K44 |
F-0008-K32 |
FC-2008-K46 |
U.S. MPIF 35-2007 Material Standard for PM Structural Parts | ||
Designation Code |
Designation Code |
Designation Code |
F-0000-10 |
FC-0205-35 |
FC-0808-45 |
F-0005-15 |
FC-0205-40 |
FC-1000-20 |
F-0005-20 |
FC-0205-60HT |
FN-0200-15 |
F-0005-25 |
FC-0205-70HT |
FN-0200-20 |
F-0005-50HT |
FC-0205-80HT |
FN-0205-20 |
F-0005-60HT |
FC-0208-30 |
FN-0205-25 |
F-0008-20 |
FC-0208-40 |
FN-0205-80HT |
F-0008-25 |
FC-0208-50 |
FN-0205-105HT |
F-0008-30 |
FC-0208-50HT |
FN-0208-30 |
F-0008-55HT |
FC-0208-65HT |
FN-0208-35 |
F-0008-65HT |
FC-0208-80HT |
FN-0208-80HT |
F-0008-75HT |
FC-0505-30 |
FN-0208-105HT |
FC-0200-15 |
FC-0505-40 |
FN-0405-80HT |